Microstructure of metallic copper nanoparticles/metallic disc interface in metal–metal bonding using them

This paper describes a metal–metal bonding technique using metallic Cu nanoparticles prepared in aqueous solution. A colloid solution of metallic Cu particles with a size of 54 ± 15 nm was prepared by reducing Cu²⁺ (0.01 M (CH₃COO)₂Cu) with hydrazine (0.6 M) in the presence of stabilizers (5 × 10^?4 M citric acid and 5 × 10^?3 M cetyltrimethylammonium bromide) in water at room temperature in air. Discs made of metallic materials (Cu, Ni/Cu, or Ag/Ni/Cu) were successfully bonded under annealing at 400 °C and pressurizing at 1.2 MPa for 5 min in H₂ gas with help of the metallic Cu particle powder. Shear strength required for separating the bonded discs was 27.9 ± 3.9 for Cu discs, 28.1 ± 4.1 for Ni/Cu discs, and 13.8 ± 2.6 MPa for Ag/Ni/Cu discs. Epitaxial crystal growth promotes on the discs with a good matching for the lattice constants between metallic nanoparticles and metallic disc surfaces, which leads to strong bonding. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis of 2,3-dihydro-1H-isoindole-1-thiones via the bromine–lithium exchange between 1-bromo-2-(1-isothiocyanatoalkyl)benzenes and butyllithium

The reaction of 1-bromo-2-(1-isothiocyanatoalkyl)benzenes, which are easily derived from 2-bromophenyl ketones or (2-bromophenyl)methanamine, with butyllithium generates 1-(1-isothiocyanatoalkyl)-2-lithiobenzenes, which immediately underwent intramolecular cyclization to give rise to the corresponding 3-substituted and 3,3-disubstituted 2,3-dihydro-1H-isoindole-1-thiones in good yields.     

Structural Elucidation of an Elicitor-Active Oligosaccharide,LN-3, Prepared from Algal Laminaran

Abstract

The primary structure of an elicitor-active oligosaccharide, LN-3, prepared from partially hydrolyzed algal laminaran was determined by means of the analyses of glycosyl-linkage, fragments by acetolysis, and glycosyl-sequence. The elicitor-active oligosaccharide, LN-3, is a pyridylaminated hepta-β-d-glucoside which was shown to have the following linear structure: β-d-Glcp(1→6)-β-d-Glcp(1→3)-β-d-Glcp(1→3)-β-d-Glcp(1→3)-β-d-Glcp(1→6)-β-d-Glcp(1→3)-Glc-PA.     

Synthesis of a (1→6)-β-Linked N-Acetyl-d-glucosamine Oligosaccharide1

Abstract

1,6-Anhydro-2-deoxy-3,4-di-O-benzyl-2-phthalimido-β-d- glucopyranose (5) was synthesized from 1,6-anhydro-β-d-mannopyranose (1) in five steps. Compound 5 was polymerized under cationic conditions and selectively yielded glucosamine oligomers (degree of polymerization 5-7). Copolymerization of 5 with 1,6-anhydro-2,3,4-tri-O-benzyl-β-d-glucopyranose indicated the low reactivity of 5 with the active cation derived from 5. Deprotection of 2-deoxy-3,4-di-O-benzyl-2-phthalimido-(1→6)-β-d-glucopyranan (7) and N-acetylation gave 2-acetamido-2-deoxy-(1→6)-β-d-glucopyranan (9).     

The Direct Partial Oxidation of Methane to Dimethyl Ether over Pt/Y2O3 Catalysts Using an NO/O2 Shuttle

Using a mixture of NO + O₂ as the oxidant enabled the direct selective oxidation of methane to dimethyl ether (DME) over Pt/Y₂O₃. The reaction was carried out in a fixed bed reactor at 0.1 MPa over a temperature range of 275–375 °C. During the activity tests, the only carbon‐containing products were DME and CO₂. The DME productivity (μmol g_cat^?1 h^?1) was comparable to oxygenate productivities reported in the literature for strong oxidants (N₂O, H₂O₂, O₃). The NO + O₂ mixture formed NO₂, which acted as the oxygen atom carrier for the ultimate oxidant O₂. During the methane partial oxidation reaction, NO and NO₂ were not reduced to N₂. In situ FTIR showed the formation of surface nitrate species, which are considered to be key intermediate species for the selective oxidation.     

Thermodynamic Control of Domain Swapping by Modulating the Helical Propensity in the Hinge Region of Myoglobin

Domain swapping is an exception to Anfinsen's dogma, and more than one structure can be produced from the same amino acid sequence by domain swapping. We have previously shown that myoglobin (Mb) can form a domain‐swapped dimer in which the hinge region is converted to a helical structure. In this study, we showed that domain‐swapped dimerization of Mb was achieved by a single Ala mutation of Gly at position 80. Multiple Ala mutations at positions 81 and 82 in addition to position 80 facilitated dimerization of Mb by stabilization of the dimeric states. Domain swapping tendencies correlated well with the helical propensity of the mutated residue in a series of Mb mutants with amino acids introduced to the hinge region. These findings demonstrate that a single mutation in the hinge loop to modify helical propensity can control oligomer formation, providing new ideas to create high‐order protein oligomers using domain swapping.     

Intense Red-Blue Luminescence Based on Superfine Control of Metal–Metal Interactions for Self-Assembled Platinum(II) Complexes

A series of assembled Pt^II complexes comprising N-heterocyclic carbene and cyanide ligands was constructed using different substituent groups, [Pt(CN)₂(R-impy)] (R-impyH⁺=1-alkyl-3-(2-pyridyl)-1H-imidazolium, R=Me ( Pt-Me ), Et ( Pt-Et ), ⁱPr ( Pt- ⁱ Pr ), and ^tBu ( Pt- ^t Bu )). All the complexes exhibited highly efficient photoluminescence with an emission quantum yield of 0.51–0.81 in the solid state at room temperature, originating from the triplet metal-metal-to-ligand charge transfer (³MMLCT) state. Their emission colors cover the entire visible region from red for Pt-Me to blue for Pt- ^t Bu . Importantly, Pt- ^t Bu is the first example that exhibits blue ³MMLCT emission. The ³MMLCT emission was proved and characterized based on the temperature dependences of the crystal structures and emission properties. The wide-range color tuning of luminescence using the ³MMLCT emission presents a new strategy of superfine control of the emission color.     

Continuous Synthesis of Aryl Amines from Phenols Utilizing Integrated Packed-Bed Flow Systems

Aryl amines are important pharmaceutical intermediates among other numerous applications. Herein, an environmentally benign route and novel approach to aryl amine synthesis using dehydrative amination of phenols with amines and styrene under continuous-flow conditions was developed. Inexpensive and readily available phenols were efficiently converted into the corresponding aryl amines, with small amounts of easily removable co-products (i.e., H₂O and alkanes), in multistep continuous-flow reactors in the presence of heterogeneous Pd catalysts. The high product selectivity and functional-group tolerance of this method allowed aryl amines with diverse functional groups to be selectively obtained in high yields over a continuous operation time of one week.